4 Advice to Choose a decorative paint rollers for walls

A good paint roller makes all the difference in your painting project. Whether you’re refreshing a room or tackling a larger renovation, the right roller will help you achieve a professional-looking finish. In the video above, This Old House painting expert Mauro Henrique breaks down various roller types and techniques, plus shares tips for both experienced and novice painters.

G.SB Product Page

Types of Paint Roller Naps

The nap of a paint roller refers to the length of the fibers that make up the roller cover. Different nap lengths are designed for specific surface types and have different paint applications and coverage.

Short Nap Rollers

Short nap rollers, typically 1/4 inch in length, are ideal for smooth surfaces. These rollers provide excellent coverage without adding unwanted texture to the wall. They’re perfect for the following:

• Cabinets
• Interior doors
• Newly plastered walls
• Smooth drywall

Medium Nap Rollers

Medium nap rollers, usually 3/8 inch in length, work for a range of semi-smooth to slightly textured surfaces. These rollers offer a balance between coverage and texture application. They work well on these surfaces:

• Ceilings
• Lightly textured walls
• Painted concrete
• Wood paneling

Long Nap Rollers

Long nap rollers, which can range from 3/4 inch to 1 inch in length, are designed for highly textured surfaces. These rollers can hold more paint and can reach deep into surface irregularities. They’re best for the following projects:

• Brick walls
• Concrete blocks
• Popcorn ceilings
• Stucco

Extra Long Nap Rollers

Extra long nap rollers, exceeding 1 inch in nap length, are designed for extremely rough surfaces such as cinder blocks. These rollers can hold the most paint and reach into the deepest crevices and textures. They’re best for these surfaces:

• Cinder blocks
• Bare brick surfaces
• Heavily limed and textured plaster walls

Choosing the Right Roller for Your Project

Consider the following factors when choosing your paint roller.

Surface Texture

The main factor that determines which roller to use is the texture of the surface you’re painting. As Henrique explains, matching the roller nap to the surface texture leads to better coverage.

Paint Type

Different types of paint work better with certain roller materials. Here are some examples:

For more information, please visit decorative paint rollers for walls.

• Foam rollers are great for oil-based paints and varnishes.
• Microfiber rollers work well with latex paints.
• Natural fiber rollers are suitable for oil-based paints and stains.
• Synthetic rollers, such as polyester, can be used with both oil- and water-based paints.

Project Size

For larger projects, consider using a larger roller width to cover more area quickly. Standard rollers are 9 inches wide, but you can find rollers up to 18 inches wide for expansive walls or ceilings. Smaller rollers, around 4 to 6 inches, are good for tight spaces and detailed work on large projects.

Techniques for Using a Paint Roller

Once you’ve chosen the right paint roller for your project, use these techniques to get a clean, professional-looking result:

• Preparation: Before painting, check that  the roller is lint-free by wrapping it with masking tape and removing it. This will pick up any loose fibers. If using a new roller, wash it with water and mild soap to remove any manufacturing residue, then allow it to dry completely.
• Loading the roller: Pour paint into the reservoir of the roller tray. Dip the roller about 1/3 of the way into the paint, then roll it back and forth on the ribbed part of the tray to distribute the paint evenly. The roller should be saturated but not dripping.
• Application: Start with the “W” or “M” method. Begin in a corner and roll the paint on in a 3–foot square “W” or “M” pattern. Then, without re-loading the roller, fill in the pattern with horizontal strokes. This leads to even distribution and coverage. Apply even, moderate pressure to the roller. Too much pressure can leave roller marks and cause splatter, while too little may result in inadequate coverage. Maintain a steady, moderate speed for the most consistent results
• Maintain a wet edge: Always work from a dry area into a wet area, overlapping the previous section by about 3–4 inches. This technique, known as “keeping a wet edge,” prevents lap marks and ensures a uniform finish.
• Avoiding roller marks: On the final pass, use light pressure and roll in one direction from top to bottom (for walls) or all in the same direction (for ceilings) to create a uniform appearance.
• Dealing with corners and edges: Use an edging tool or brush for areas the roller can’t reach easily. Then, blend these areas with the roller while the paint is still wet for a seamless finish.

Our Conclusion

Choosing the right paint roller and using proper techniques can significantly impact the quality of your painting project. By matching the roller nap to your surface texture and following the expert advice provided by Henrique, you can achieve professional-looking results when painting your home. 

Woven fabrics, including microfiber and mohair, prevent lint from being left behind while providing an exceptionally smooth finish.

Knit fabrics, like polyester and lambswool, hold more paint and cover larger areas faster while leaving some stipple.

Roller cover nap sizes, or thickness of the fibers, varies from low to high based on the surface you are painting. Low-nap rollers pick up less paint, while high-nap rollers pick up and hold more for larger projects.

Surface texture and general environmental factors, including temperature and humidity, should also factor into your roller cover selection. For uniform interior surfaces like drywall, cabinets and metal, use roller covers with smaller nap sizes, like our ¼-inch nap WhiteDove™, to ensure a smooth finish. Walls, ceilings and paneling require a slightly larger nap size of 3/8-inch; for lightly textured walls, decks and concrete, use a ½-inch nap; and for textured ceilings, stucco and masonry, use ¾-inch.

For outdoor jobs, or when painting rough interior surfaces such as cinder block, rough wood and brick, look for roller covers with a higher nap, like our 1-inch GoldenEagle™ for greater paint pickup that reaches every nook and cranny, as well as faster application and increased productivity.

The company is the world’s best types of paint brushes for walls supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.