How to operate the bucket wheel sand washer in daily use? What details

Bucket sand washing machine is also called stone washing machine, which is widely used in the washing of materials in mining, building materials, chemical industry, transportation, concrete mixing plant and other fields. Bucket sand washing machine has the advantages of high cleanliness, reasonable structure, large output, and low failure rate. So, do you know how it operates during daily use? What details should be paid attention to in daily maintenance?

Jiafu are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

1. Before starting the machine, the operator must check each lubrication point. First, the operator should check whether there is enough grease at each lubrication point and regularly add lubricating oil. At the same time, the operator should check the connecting bolts to ensure that the connecting bolts are tight.

2. After starting the motor, do not add material immediately. After the machine is running normally, turn on the water pump first, adjust the water flow, and then start to feed gradually.

3. Stop feeding and then stop. Stop feeding before the Bucket-wheel sand dewatering washer stops running, and then stop the machine after all the materials in the box are exhausted.

4. Regularly check the internal conditions of the sand washing machine. The operator should regularly open the bearing cover to check the inside of the sand washer machine to check whether the bearing is damaged.

5. The operator should always check the wear of the sand washer blades, find the problem and replace it in time. This can avoid unnecessary losses.

1. Bearings are the most easily damaged components of the sand washing machine, and we need to oil and maintain them regularly. The cycle of replacing the lubricating oil of the bearings and other parts of the bucket-type sand washer is generally about 400 hours, and the cleaning cycle is generally when the bucket-type sand washer machine has a working time of 2,000 hours, and the lubricating oil is frequently replaced and the bucket-type sand washer is cleaned. The machine is beneficial to improve the production efficiency of the bucket-type sand washing machine.

For more information, please visit GX Sand Washing Machine.

2. Regularly check the degree of wear of the parts of the bucket sand washer and replace them in time. Wear-resistant parts include central feed pipe, impeller, upper and lower pipes, protective devices, cone caps, and wear blocks, etc. When the wheel bucket sand washer is shut down, check the wear parts. After inspection, repair or replace worn or damaged parts.

3. The operator should pay attention to whether there is noise in the daily operation of the machine; observe the operation of the belt, sealing device, water pipe, and other components; check whether the motor and gearbox are overheated and whether the bolts are tightened.

The above is the operation method and daily maintenance method of the bucket sand wheel washer for sale. The Nile Machinery has rich experience and strong technical strength and can provide users with a free consultation, model selection, quotation, design, and production line services. If you want to know more about bucket wheel sand washing machines, you can consult online customer service for free.

A high quality spiral sand washing machine for you sand wash plant. 
The spiral sand washing machine (XL series) is able to wash and separate the soil and other impurities in sand and gravel aggregate. I he enclosed structure, adjustable overflow weir plate, and reliable transmission parts increase the cleaning and dehydration effect, which can be applied to road, hydraulic, and construction industries.

The main features are listed below.

1. The structure is simple. The bearing device of impeller driving is isolated from the washing water and sand thus largely decreasing the failure rate.
2. The loss of fine sand and stone powder in sand washing process is small. The washed sand is of good gradation; the fineness modulus can easily meet the requirements of relevant standards.
3. Almost no components of the machine are vulnerable to wearing and breaking down except the screen.

An XS Sand Washing Machine With Wheel Type is a kind of sand washing machine is mainly used for washing of mixed soil and dust, along with the sand lifting in mining. The transmission parts of this machine are isolated from the water and sand, which largely reduce the failure rate during the operation process. The main features of this kind of machine are listed as follows.

If you are looking for more details, kindly visit sand washing equipment.