UV Lights & Torches - Advanced NDT

The Labino Standard MPXL Ultraviolet UV Inspection Lights offer many advantages over previous technology. Using a new type of low wattage bulb, they produce a higher UV output - yet generate little heat. This means that these black lights are safe to use in dark areas as they stay cool without the need for inbuilt fans which draw dirt into the lights. The Labino Standard MPXL ultra violet lights are sealed to IP65 allowing them to be safely splashed with water in Penetrant wash areas. Various styles of lamps are available operating from either mains or battery power supplies. Full UV intensity ( - 45,000µW/cm2, beam dependant) is achieved after about 5-15 seconds from start up, and can be powered down and restarted immediately with no wait times. The Labino MPXL series of UV blacklight lamps produce very high UV light intensities, creating extreme excitation of fluorescent material, which makes it possible to see things, in daylight and at great distances, that was impossible with former technology. Unaffected by surrounding magnetic fields and sealed to IP65 standards, in rugged aluminium housings, the Labino UV lights are designed for the industries where they are used.

AJR contains other products and information you need, so please check it out.

The Labino® SuperXenon UV inspection lamp 35W are based on MPXL technology. The Labino® SuperXenon UV lamps contain the electronics and bulb in a single housing and is available with either no handle (SXNH), a pistol handle (SXPH) or as a top handle (SXH). Labino® SuperXenon 35W UV Lamp has all the features as the 50 W version but has lower UV intensities. Some industry standards state a lower UV intensity must be used. This 35W SuperXenon allows for this but still giving you great operating features and portability.

As much Power as you can get! Labino® SuperXenon 50 W UV lamp is one of the most powerful hand-held UV lamp on the market! The 50 W Xenon bulb offers an extremely high UV intensity, providing a very clear excitation of fluorescent material. This lamp makes it possible to search very large areas as you can use a floodlight reflector and still see excitation's in daylight and at great distances. The Labino® SuperXenon UV inspection lamp 50W are based on MPXL technology. The Labino® SuperXenon UV lamps contain the electronics and bulb in a single housing and is available with either no handle (SXNH), a pistol handle (SXPH) or as a top handle (SXH).

Labino’s LED overhead inspection lamp, GX Orion, is a modular system that can be used to cover large areas. There are three different models to choose from, remote controlled with multiple UV intensities, UV on/off button only, and UV and Visible (white) light on/off buttons only.  The GX Series family of products has been specifically designed to meet the ASTM E-18 and ISO -12 standards as well requirements set by the PRIMES. The optics used in the GX Series meet the Roll-Royce RRES specification. The beam profile of the UV light is extremely homogeneous without any footprints showing from the LEDs, shades, dark spots or other disturbing defects.  All GX Orion models have a built-in PLC interface designed to connect to your PLC system. You can choose a “mother” or a “slave” GX Orion unit, with or without remote panel, with or without on/off power switches and still be able to monitor the unit completely through your computer via the PLC interface.
Models in compliance with: - ASTM E- Standard, Rolls-Royce RRES , Airbus AITM6-, Pratt & Whitney, The Boeing Co, ISO -12 and USAF.

The company is the world’s best Ndt Uv LED Lamp supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

BB 2.0 Series products Helios, Ikaros & Artemis are lights with a powerful and wide UV Output. They provide large coverage and weigh less than many comparable products. The mains operated model weighs just 1.2 kg (2.6 lbs) and the battery operated model weighs just 1.7 kg (3.7 lbs). They are widely used for field inspections or on an MPI bench. BB 2.0 Series lamps are penetrant resistant and have ingress protection 68 (IP68 Waterproof).The BB 2.0 Series family of products has been specifically designed to meet the ASTM E-18 and ISO -12 standards as well requirements set by the PRIMES. The optics used in the BB 2.0 Series meet the Rolls-Royce RRES specification. The beam profile of the UV light is extremely homogeneous without any footprints showing from the LED’s, shades, dark spots or other disturbing defects. NDT professionals worldwide recognise BB 2.0 series qualities, making it Labino’s best-selling product for many years in a row. This lamp is based on LED technology and offers you a very narrow spectra with a peak wavelength of 365nm. Each unit consists of 8 ultraviolet LEDs. Each LED’s life is estimated at 30,000 hours. All electronics as well as the LEDs are placed in a single rugged housing with the diameter not exceeding 15.5cm (6.1 inches).
Models in compliance with: - ASTM E- Standard, Rolls-Royce RRES , Airbus AITM6-, Pratt & Whitney, The Boeing Co, ISO -12 and USAF.

MB 2.0 Series products Zeus, Hermes and Iris are UV inspection lights. They are extremely robust, compact and light. Certified to IP68 waterproof. Designed for use in heavy industries with very difficult operating environments. The mains operated model weighs just 732 grams (1.6 lbs) and the battery model weighs just 781 grams (1.7 lbs). The Iris weighs 568 grams (1.3 lbs). Estimated LED Life time of 30,000 hours.The MB 2.0 Series of inspection products have been specifically designed to meet various industry standards. The beam profile of the UV Light is extremely homogeneous without any footprints showing from the LED’s shades, dark spots or other disturbing defects.
Models in compliance with: - ASTM E- Standard, Rolls-Royce RRES , Airbus AITM6-, Pratt & Whitney, The Boeing Co, ISO -12 and USAF.

Ultraviolet (UV) disinfection technology has been the star performer in water and air treatment over the past two decades, due in part to its ability to provide treatment without the use of harmful chemicals.

UV represents wavelengths that fall between visible light and x-ray on the electromagnetic spectrum. The UV range can be further divided into UV-A, UV-B, UV-C, and Vacuum-UV. The UV-C portion represents wavelengths from 200 nm – 280 nm, the wavelength used in our LED disinfection products.

Want more information on Surface Roughness Tester Manufacturer? Feel free to contact us.